Well water pump.
I have water to the house from an outside well. When we lose power, we have to reprime our well. Most likely the foot valve is not working properly. Checked with a well drilling company and there is no way to replace the foot valve. I would have to have a new well drilled. If we are home, we hook a hose to our neighbors outside faucet, to prime our well. But if we are not home and power is restored, the pump will start and since there is no water in it, the pump will run and run, probably till the motor burns out. My question is this: Is there a device that I can plug into the electric outlet, then plug the water pump into that device, so when the power is restored the pump will not start until I restart it.