+ Reply to Thread
Results 1 to 10 of 21

Hybrid View

  1. #1
    Join Date
    Sep 2012
    Location
    Eastern Kansas
    Posts
    104

    Default Need tips for getting ledger level and at right height

    I don't have a rotary laser as they used here -- http://www.finehomebuilding.com/how-...ck-layout.aspx -- so what are some tips n tricks I can use to get a level ledger that sits at the right height such that my front door threshold sits right on the final flooring?

  2. #2
    Join Date
    Aug 2007
    Posts
    7,241

    Default Re: Need tips for getting ledger level and at right height

    So rent one.

    Another option would be to use a water level, relatively inexpensive to assemble, just as accurate.
    I suffer from CDO ... Its like OCD, but in alphabetical order, LIKE IT SHOULD BE!!!

  3. #3
    Join Date
    Sep 2012
    Location
    Eastern Kansas
    Posts
    104

    Default Re: Need tips for getting ledger level and at right height

    Quote Originally Posted by A. Spruce View Post
    So rent one.
    I get a few hours here and there to work on the project, and the nearest rental place is 45 miles away. Might that low priced Skill or Johnson be adequate? I could use it to set the ledger and also my post for the rim joists. Looks slick - but I'm guessing there are old tricks that make this easy as well.

  4. #4
    Join Date
    Aug 2007
    Posts
    7,241

    Default Re: Need tips for getting ledger level and at right height

    I am not familiar with those products to offer an opinion. What I would recommend is to look for real world reviews of them before making your purchase.
    I suffer from CDO ... Its like OCD, but in alphabetical order, LIKE IT SHOULD BE!!!

  5. #5
    Join Date
    Dec 2007
    Location
    Tennessee
    Posts
    1,791

    Default Re: Need tips for getting ledger level and at right height

    Do what carpenters did before the laser level was invented, put a regular level on a 2x4.

  6. #6
    Join Date
    Sep 2012
    Location
    Boston
    Posts
    1,004

    Default Re: Need tips for getting ledger level and at right height

    regular level on a 2x4 is what i sometimes do.....if not, just buy or make a water level. it's at least as accurate as a laser or regular level if not more so and it's a piece of cake to use.

  7. #7
    Join Date
    Sep 2012
    Location
    Eastern Kansas
    Posts
    104

    Default Re: Need tips for getting ledger level and at right height

    Quote Originally Posted by coloradotrout View Post
    I don't have a rotary laser as they used here -- http://www.finehomebuilding.com/how-...ck-layout.aspx -- so what are some tips n tricks I can use to get a level ledger that sits at the right height such that my front door threshold sits right on the final flooring?
    Could this be sufficient -- http://www.johnsonlevel.com/productD...s&ID=17&pID=38 ? It's $70.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •