At work I need to install a sheet of 1/2" sheetrock to replace a 5/8" sheet. Needless to say there is a different in thickness. I was told I have to use the 1/2" sheet so I need to move it out a bit so it will match the sheets on either side. What material can I use to stick to the studs, maybe a weather stripping type material? It needs to be firm so the 1/2" sheet will not crsuh the material when I'm screwing it into place. Worst case, I suppose I can use Liquid Nail and jimmie the sheet into place until the glue dries. Thanks for any help ...

tomana