Hi there folks,

Long time lurker, first time poster.

I've got a bit of a problem with my upper cabinets over my fridge and freezer. The wife decided she wanted a side by side full fridge and freezer combo to have a built in look. The opening is about 66 inches by 80ish inches.

We have 9 foot ceilings with approximately 1 foot gap between the top of the cabinets to the actual ceiling.

The cabinet guys installed 2 upper cabinets with a total of 4 doors over the opening connecting them to the sides with large sheets of nice trim board about 3/4 inch.

The problem is that the cabinets are not attached to the wall so all the platters and other stuff are putting weight on the unit and pulling the middle down which causes the two middle doors to not open as they butt up against the metal trim (for the built in look).

Any suggestions on fixing this issue? I'll take a picture tonight and post it on here.