+ Reply to Thread
Results 1 to 9 of 9

Hybrid View

  1. #1
    Join Date
    Feb 2013
    Posts
    3

    Default Sagging upper cabinets

    Hi there folks,

    Long time lurker, first time poster.

    I've got a bit of a problem with my upper cabinets over my fridge and freezer. The wife decided she wanted a side by side full fridge and freezer combo to have a built in look. The opening is about 66 inches by 80ish inches.

    We have 9 foot ceilings with approximately 1 foot gap between the top of the cabinets to the actual ceiling.

    The cabinet guys installed 2 upper cabinets with a total of 4 doors over the opening connecting them to the sides with large sheets of nice trim board about 3/4 inch.

    The problem is that the cabinets are not attached to the wall so all the platters and other stuff are putting weight on the unit and pulling the middle down which causes the two middle doors to not open as they butt up against the metal trim (for the built in look).

    Any suggestions on fixing this issue? I'll take a picture tonight and post it on here.

    thanks,
    nkripted

  2. #2
    Join Date
    Sep 2012
    Location
    Boston
    Posts
    1,004

    Default Re: Sagging upper cabinets

    do the backside of the cabinets butt up agaqinst the wall or are they a shorter depth due to the fact that they're over the fridge?

  3. #3
    Join Date
    Feb 2013
    Posts
    3

    Default Re: Sagging upper cabinets

    They do not butt up against the wall. There is a maybe 5 inch gap between the back of the cabinet and the wall.

    On my way home...I'll be on line in about 2hours

    thanks for the feedback
    Last edited by nkripted; 02-12-2013 at 04:25 PM.

  4. #4
    Join Date
    Aug 2007
    Posts
    7,013

    Default Re: Sagging upper cabinets

    The cabinets need to be fastened to the framing within the wall to keep them from sagging OR be designed and built to support themselves over that span. It was a careless and/or incompetent installer who would do otherwise.

    You might be able to build a support frame behind the cabinets to carry them. If the cabinets are sturdy enough to be hung from the top, you could span the gap with three or four 2x4's laid flat over the depth of the cabinet. Another alternative would be to support the span from the bottom, though this will probably create clearance issues with the fridge/freezer.

    The best option would be to have a custom cabinet made for the space that would span the opening and attach to the wall and adjoining cabinets on either side.
    I suffer from CDO ... Its like OCD, but in alphabetical order, LIKE IT SHOULD BE!!!

  5. #5
    Join Date
    Dec 2010
    Location
    Houston Texas
    Posts
    2,969

    Default Re: Sagging upper cabinets

    Part of the problem is the weight of the contents. Yes, its a nice place to store all those large, heavy, seldom used items, but the cabinets don't like it too much.

    Aside from replacing the cabinets;

    1- Remove the cabinets
    2- Determine if the cabinets are fixable. It may take a few days of adjusting bar clamps to get them back to shape.
    3- Once back to shape, stiffen the cabinets with tube steel carefully hidden from normal view.
    4- Re-install the cabinets.

  6. #6
    Join Date
    Feb 2013
    Posts
    3

    Default Re: Sagging upper cabinets

    Thanks for the replies guys...

    Would the tube steel go underneath? i have about a foot between the top of the fridge and the cabinets.

    Would using L shaped steel trusses underneath work as well??

    thanks for the help

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •