+ Reply to Thread
Results 1 to 10 of 10

Hybrid View

  1. #1
    Join Date
    Jan 2013
    Posts
    3

    Exclamation Transition Too Wide for T Molding

    I'm installing a Pergo laminate floor in my kitchen. The opening between my kitchen and the family room is 88 inches wide, but the T modling that Pergo supplies is only 78 inches long. What is the best method for splicing two sections together so that it will withstand the foot traffic? I've tried emailing Pergo, but received no answer.

  2. #2
    Join Date
    Aug 2007
    Posts
    6,963

    Default Re: Transition Too Wide for T Molding

    Back cut the longer piece at a 30* angle, so that the toe of the cut is on the bottom edge. Now cut your short piece at the mating angle and install.

    For a better visual, when you lay the long molding on the floor, you want the bevel cut to go from the top surface to the bottom surface, parallel to the floor, again, the toe or point of the cut will be on the bottom. The short molding will be cut in the same manner, only with the point on the top of the molding.
    I suffer from CDO ... Its like OCD, but in alphabetical order, LIKE IT SHOULD BE!!!

  3. #3
    Join Date
    Nov 2014
    Posts
    1

    Default Re: Transition Too Wide for T Molding

    I have no idea of what back cutting means as a DIY'er. Can't find anything on it on the internet either.
    I have the same problem with t molding. The one for the laminate flooring is too short by 1 ft so I will have to cut a second piece to fit. Can't I just butt it up and glue it for a seamless look or does back cutting hide the seam in some way? I have heard of coping for crown molding but the t molding is mdf and I am worried about even making straight cuts.

  4. #4
    Join Date
    Aug 2007
    Posts
    6,963

    Default Re: Transition Too Wide for T Molding

    Yes, you can do a butt joint, however, it will not be invisible, and over time will likely open up. A back bevel joint is the same thing as a scarf joint. You are simply cutting an angle on one piece and a complimentary mating angle on the second piece, so that when you place both pieces together, the angled cuts overlap and the two pieces become one.

    As described in my previous post, you want this angle to flow top to bottom on the pieces, not side to side.
    I suffer from CDO ... Its like OCD, but in alphabetical order, LIKE IT SHOULD BE!!!

  5. #5
    Join Date
    Jul 2010
    Location
    SoCal
    Posts
    6,376

    Default Re: Transition Too Wide for T Molding

    Go to flooring outlets, many of them carry 8' long T moldings.

  6. #6
    Join Date
    Aug 2007
    Posts
    6,963

    Default Re: Transition Too Wide for T Molding

    Quote Originally Posted by dj1 View Post
    Go to flooring outlets, many of them carry 8' long T moldings.
    In what universe? Every flooring molding I've ever encountered was less than 8 feet, some less than 7 feet.
    I suffer from CDO ... Its like OCD, but in alphabetical order, LIKE IT SHOULD BE!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •