+ Reply to Thread
Results 1 to 4 of 4
  1. #1
    Join Date
    Dec 2010
    Location
    Iowa
    Posts
    20

    Default duct work for furnance

    does duct work ever get loose ? cause it feels like it is vibrating the floor which in turn vibrates my bed when I sleep at night. How can that be fixed ?

  2. #2
    Join Date
    May 2008
    Location
    Pacific Northwet
    Posts
    1,661

    Default Re: duct work for furnance

    The problem is more likely to be the blower in the furnace. It may be out of balance or need to be cleaned. The blower should be installed with rubber "shock mounts" to isolate vibrations; these mounts may have deteriorated and need to be replaced.
    The "Senior Member" designation under my name doesn't mean I know a lot, it just means I talk a lot.I've been a DIYer since I was 12 (thanks, Dad!). I have read several books on various home improvement topics. I do not have any current code books I can refer to. I was an apprentice plumber for two years.

  3. #3
    Join Date
    Dec 2010
    Location
    Iowa
    Posts
    20

    Default Re: duct work for furnance

    thanks so much

  4. #4
    Join Date
    Dec 2010
    Location
    Iowa
    Posts
    20

    Default Re: duct work for furnance/ solved

    problem solved , there was a piece of insulation that had gotten in the blower .... NO VIBRATION yippee thanks yall

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •