+ Reply to Thread
Results 1 to 3 of 3
  1. #1
    Join Date
    Mar 2011
    Posts
    6

    Default Shower Moisture Venting Question

    Hello, I have a newly installed Shower Vent/fan that just currently just exhausts the moisture into my attic.

    My Question is, can I link the SHower Vent to an Existing VERTICAL Vent Stack? I'm imagining just cutting the Vent Stack and put in a WYE ABS fitting, connect the Shower to the WYE fitting, and the air/moisture goes out the stack.

    Is this to code/legal? Will it work?

    The reason I don't want to go Horizontal and put in a new vent tube out of a wall is because I don't have a hammer drill and bit to punch a 3" or 4" hole in my exterior wall.

    Do I just bite the bullet and go Horizontal?

    In my mind it seems easier to go Vertical using a Vent Stack.

    Thoughts?

    Thanks guys!

  2. #2
    Join Date
    Nov 2012
    Location
    Santa Ana, CA
    Posts
    13

    Default Re: Shower Moisture Venting Question

    The use of wet venting would eliminate the need for the individual vents. You can combine the vent of your sink, tub and toilet into a single one

  3. #3
    Join Date
    Dec 2010
    Location
    Houston Texas
    Posts
    2,360

    Default Re: Shower Moisture Venting Question

    This is a duplicate post and has been answered elsewhere

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •