Re: Swivel adapters
Well, Don never added any posts to this thread, so I don't know if he is reading it, but I will add a thought for those who are interested. I tried to use the kit that has an extension arm with a compression nut and sleeve to connect to the elbow on the valve. I could not get it to stop leaking. When I tried to tighten the nut on the compression fitting, it would "jump the thread's" on the elbow and never compress the sleeve enough to make a good seal. So I ordered the threaded couplings from Home Depot, and I will solder everything together. I will post some photos when the job is done.