+ Reply to Thread
Results 1 to 3 of 3
  1. #1
    Join Date
    Apr 2009
    Posts
    1

    Default Driving me crazy! Light bulb installation

    Ok, I have finally put trim around my recessed lighting and the springs are pulling the socket down at an angle that makes it impossible to screw the light bulb in correctly. I have 6 fixtures and can't get a bulb to seat correctly in single one of them. Works just fine without the trim. Is there a trick to this I am missing? I am putting the springs from the trim into the keyhole in the recessed lighting (As per the instructions of the trim). Any help would be appreciated. Thanks, Jake

  2. #2
    Join Date
    Feb 2009
    Posts
    693

    Default Re: Driving me crazy! Light bulb installation

    Righty tighty, Lefty loosy…… Just deal with it.

  3. #3
    Join Date
    Mar 2009
    Posts
    1,387

    Default Re: Driving me crazy! Light bulb installation

    Howdy perhaps the wrong trim for the recessed light can....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •