Results 1 to 3 of 3

Thread: Walnut gun rack

Hybrid View

  1. #1
    Join Date
    May 2010

    Default Walnut gun rack

    i finally figured a way to get my pictures attached!
    i'm good with my hands & brain, but not techno savvy.

    anyhoo. thanks for the advice on using an oil & shellac finish for walnut in my original "staining walnut" thread. the project was actually a gun rack, which i finished with Watco danish oil & amber shellac. i didn't know anything about garnet shellac at that time, & didn't have any, but now i do. the flakes are a beautiful color, and i hope the shellac comes out very close to that color.
    i have another project going now that involves walut, & i plan to try the garnet on that (already oiled & waiting to dry).

    if you compare the picures, you'll notice that there are two vetical pieces in front of the guns in picture #8. these are removable, and are there to hide the fact that when the guns are level, the gun rests are not (gun rests are all adjustable, with a captive nut in a "t" slot).

    hopefully, these pics will pass inspection.

    thanks again

  2. #2
    Join Date
    May 2010

    Default Re: Walnut gun rack

    sorry, pics didn't upload correctly
    Attached Files Attached Files

  3. #3
    Join Date
    Aug 2007

    Default Re: Walnut gun rack

    I don't believe the Watco oil finish is meant to have another finish put over it. Any other finish over it is liable to not adhere well & flake off.
    Watco done right is a very durable finish if a few coats are applied. More than up to a gunrack

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts