+ Reply to Thread
Results 1 to 6 of 6

Thread: roof

  1. #1
    Join Date
    Aug 2012
    Posts
    3

    Default roof

    How is the area of the roof that butts to fascia covered with aluminum with a roof over that to be addressed? Flashed?

  2. #2
    Join Date
    Jul 2010
    Location
    SoCal
    Posts
    5,089

    Default Re: roof

    I read you question twice and still don't know what you're asking.

    Different areas have different codes regarding this subject.

  3. #3
    Join Date
    Aug 2008
    Posts
    66

    Default Re: roof

    I can't figure out your post either-----------can you post a photo, or explain what you have?

  4. #4
    Join Date
    Jul 2012
    Posts
    3

    Default Re: roof

    I'm just joining the conversation - as I'm about to re-shingle my 20+ year old roof. I plan to shingle over the existing roof, not remove the single layer of existing shingles. Any tips I should know about? I will purchase 30-year architectural shingles and rent a nailer from Home Depot. I have a very shallow pitch, and 1800SF. Any advice?

  5. #5
    Join Date
    Jan 2009
    Location
    Bristol, TN
    Posts
    21

    Default Re: roof

    your question is hard to understand. Try several sentences so we can figure out what you need.

  6. #6
    Join Date
    Jan 2009
    Location
    Bristol, TN
    Posts
    21

    Default Re: roof RoyB

    I have been told that to many layers of shingles can actually hurt your roof. BE carefull

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •