+ Reply to Thread
Results 1 to 4 of 4

Thread: roof

  1. #1
    Join Date
    Aug 2012
    Posts
    3

    Default roof

    Had a roof replaced,there was exposed nails with a sealant over them on the last row of shingles that butts up to a wall of vinyl siding. I do not think this is the proper way of installation. Advice on the proper way.

  2. #2
    Join Date
    Jul 2010
    Location
    SoCal
    Posts
    5,433

    Default Re: roof

    The last row gets nailed (how else would you do it?) and the roofer can either tar the nail heads or place a flashing/ridge over it, depending on the location.

  3. #3
    Join Date
    Aug 2012
    Posts
    3

    Default Re: roof

    HOW DO YOU INSTALL THE FLASHING AND RIDGE? mhoff

  4. #4
    Join Date
    Jul 2010
    Location
    SoCal
    Posts
    5,433

    Default Re: roof

    At this point the best advice I can give you is: call your roofer and ask him to finish his job the way you want him to. If you need to add extra, that's OK.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •