+ Reply to Thread
Results 1 to 4 of 4
  1. #1
    Join Date
    Jun 2012
    Posts
    1

    Default Need a 3/16" mirror made

    I have an old med cabinet with sliding mirror doors taht are old 3/16 width. The glass companies tell me I can only get 1/4 inch. I also need plastic guides that clip on so the bottom of the glass mirror does not contact the tracks directly. Where can i find this material and order it?

  2. #2
    Join Date
    Aug 2007
    Posts
    6,481

    Default Re: Need a 3/16" mirror made

    Time to find a new glass shop. You should be able to buy thicknesses from 1/8" on up. They should also be able to source the clips you're looking for if you can't reuse the existing.
    I suffer from CDO ... Its like OCD, but in alphabetical order, LIKE IT SHOULD BE!!!

  3. #3
    Join Date
    Dec 2010
    Location
    Houston Texas
    Posts
    2,360

    Default Re: Need a 3/16" mirror made

    Or you can hold it in place with a few dabs of silicone

  4. #4
    Join Date
    Jul 2010
    Location
    SoCal
    Posts
    5,081

    Default Re: Need a 3/16" mirror made

    I agree, mirror glass is available in many thicknesses. Just look in other outlets.

    But if the looking around and findind it is impossible, do what Houston says...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •