+ Reply to Thread
Results 1 to 9 of 9

Hybrid View

  1. #1
    Join Date
    Jun 2012
    Posts
    1

    Default Did I completely mess up installing toilet flange on subfloor?

    I'm remodeling a bathroom. I installed a new PVC toilet flange and glued it using PVC glue. It is flush with the subfloor. After using half inch concrete board (and what will likely be another half inch of thinset and tile) I realize that the flange will likely be about an inch below the surface of the tile. How bad did I mess up? Anything I can do to fix the problem?

  2. #2
    Join Date
    Aug 2007
    Posts
    7,084

    Default Re: Did I completely mess up installing toilet flange on subfloor?

    The flange needs to be flush with the surface of the finished floor. Thankfully, there are a few things you can do, the easiest will be to raise up what you've got, if you have the space and slack to do so, otherwise, install a slip fit flange. This type of flange has a rubber gasket on it and slides down inside the existing flange. You shim it to the required height and then screw it down firmly. I just had to install one of these and they work very nicely. Another option is a glue type flange, as long as you have not put a wax ring down first, this would work well.
    I suffer from CDO ... Its like OCD, but in alphabetical order, LIKE IT SHOULD BE!!!

  3. #3
    Join Date
    Dec 2010
    Location
    Houston Texas
    Posts
    2,969

    Default Re: Did I completely mess up installing toilet flange on subfloor?

    There are also extension flanges such as the Oatey twist and fit, as well as HD SKU # 731163 which has a very nice stainless ring.

    SaniSeal makes thick foam rings which replace the wax rings. They are available on Amazon.


    (This would be a lot easier if I could post pics and links. Hint Hint)

  4. #4
    Join Date
    Jan 2009
    Location
    Needham, MA
    Posts
    559

    Default Re: Did I completely mess up installing toilet flange on subfloor?

    those are good ideas, only important point is that the flange should sit "on" the finished floor, not flush with the finished floor.

  5. #5
    Join Date
    Jul 2010
    Location
    SoCal
    Posts
    6,598

    Default Re: Did I completely mess up installing toilet flange on subfloor?

    Quote Originally Posted by MLBSF View Post
    those are good ideas, only important point is that the flange should sit "on" the finished floor, not flush with the finished floor.
    I don't think that this is a requirement. I have many toilets (in rental homes) with flanges which don't even touch the finished floor (meaning, the finished floor is cut short of the flange), but most of them are flush.

  6. #6
    Join Date
    Aug 2007
    Posts
    7,084

    Default Re: Did I completely mess up installing toilet flange on subfloor?

    All the tile setters I've had set the flange flush with the finished floor. For vinyl floors I've laid, anything flush to slightly proud of the surface works fine.

    The thing is, if the flange is above the finished floor height, it crushes the wax ring too much, to the point it can fail. A flush flange is the right height for a standard wax ring.

    I'm not trying to argue, we all have our tried and true methods, flush has always worked for me, proud flanges can be a bit of a pain to deal with.
    I suffer from CDO ... Its like OCD, but in alphabetical order, LIKE IT SHOULD BE!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •