Does it matter where in the water system that the pressure tank and well pressure switch are located? I have seen in most homes the pressure switch and tank at the place where the water enters the house from the well. In my home the water enters into the garage, through a sediment filter, through the water softner and then on into the house. My pressure tank and switch are located in my basement on the opposite end of my house past 2 bathrooms,my laundry room and kitchen. I've never had great water pressure and I am curious if the location of the switch and tank could be part of the problem. My switch is a 30/50 and I recently put 28 PSI in the pressure tank it was 22 PSI. Adding the air pressure did help slightly. Thanks for any info!!