Re: Crown molding coping question
No, you place the molding in the saw upside down, with the bottom against the fence and the top out from the fence at the spring angle. Watch this video http://www.youtube.com/watch?v=pvRpm...eature=related
Originally Posted by qhwang
If you want to cut the crown flat you need to set up a precise angle and bevel angle. For 38 degree spring, If I remember correctly, you need a 31.6 degree andgle and a 33.9 degree bevel. I personally prefer the first method.
Last edited by JLMCDANIEL; 03-12-2012 at 05:16 PM.
Be sure you live your life, because you are a long time dead.-Scottish Proverb