Subfloor Not installed perpendicular to joists
Bathroom was gutted. Existing subfloor was 1/2" plywood so I requested my handyman to purchase grade BC 3/4" inch plywood to lay over the 1/2" plywood to prepare for tiling. Rather than lay the one sheet with the grain perpendicular to the joists he cut the board in half with the grain running parallel and nailed them into the joists.
Do I need to rip these out and have him do it over again?
Last edited by Mauiblue; 03-07-2012 at 06:53 AM.
Tags for this Thread