+ Reply to Thread
Results 1 to 8 of 8

Hybrid View

  1. #1
    Join Date
    Mar 2012
    Posts
    12

    Default Cost to rewire a 200 yr old home

    Hi, I am seriously considering purchasing an antique home. It has 3 floors (the top is a walk up attic) and a fieldstone basement. The electrical is the old fusebox type & would definately need to be upgraded. The home is just under 3,000 sq. ft. Can anyone give me a reasonable or ballpark estimate of the cost in Massachusetts? South of Boston area?

    Thank you

  2. #2
    Join Date
    May 2008
    Location
    Pacific Northwet
    Posts
    1,577

    Default Re: Cost to rewire a 200 yr old home

    I think there are too many variables to even give a ballpark estimate here. You'd be best served to ask your friends and neighbors to recommend some licensed electricians, then get at least three estimates. Make sure the electrician understands EVERYTHING you want to do, and that you get a detailed proposal. A project scoped as "rewire house" is so extremely vague you will be hit with umpteen change orders when throughout the project you find that your interpretation of "rewire house" is different from the electrician's.

    With that age of house, the style of construction could make rewiring easy or it could make it very difficult. The skill of the electrician will play a big part in his or her ability to route wiring efficiently, well-concealed, and with a minimum of damage.

    Also to consider are your plans & dreams for the house to accommodate future needs. Electrical wiring is more than lights and outlets nowadays; you may also wish to install network, video, security, or home theater wiring which adds to the cost of the project (but may be cheaper to do now than later).

    As for lighting, a fluorescent strip light installs the same way as a bare-bulb porcelain "keyless" fixture, but many of the new LED lighting options may require completely different methods of installation.

    All stuff to consider in your project. Those who don't plan ahead get left behind.
    Last edited by Fencepost; 03-02-2012 at 07:15 PM.
    The "Senior Member" designation under my name doesn't mean I know a lot, it just means I talk a lot.I've been a DIYer since I was 12 (thanks, Dad!). I have read several books on various home improvement topics. I do not have any current code books I can refer to. I was an apprentice plumber for two years.

  3. #3
    Join Date
    Mar 2012
    Posts
    12

    Default Re: Cost to rewire a 200 yr old home

    Thanks for the suggestions. I have added them to my list of things to consider should we move forward.

  4. #4
    Join Date
    May 2011
    Posts
    251

    Default Re: Cost to rewire a 200 yr old home

    Best to start small the take care of critical and larger appliances then move on to the nearest circuits or upstairs circuits.

    You may want to combine replacing plumbing and electrical together. Do things like run a homerun to the attic in conduit and distribute it from there.

    Again, go after biggest hazards first. Fused service disconnects, fuse panels and overloaded circuits... and getting major appliances on their own branch circuit. Dishwashers, disposals, fridge, washing machine, microwave, entertainment center all should have their own circuit with a proper ground. lighting is probably the lowest priority. install CFL's and LEDs to reduce the load.
    1925 Two-Story Stucco Beaux Arts Neoclassical

  5. #5
    Join Date
    Mar 2012
    Posts
    12

    Default Re: Cost to rewire a 200 yr old home

    thanks - so glad I posted here. Even though I recently put on an addition & thought I covered everything (washer dryer, cable, phone) it was just one big room & a garage, not a 10 room whole house project.

  6. #6
    Join Date
    Jul 2010
    Location
    SoCal
    Posts
    6,385

    Default Re: Cost to rewire a 200 yr old home

    Replacing wires in a 200 old house should be top priority, since it's a safety issue. You can start with the larger users, as motoguy said, but you have to do it soon, then replace the rest of the wires as you go along.

    However the pipes are different. Replace them all at once.

    Prices? they vary from place to place and from contractor to contractor. Just get a few estimates and compare them.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •