+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2012

    Default Foamy Hot Water from faucet

    I have a Weil Mclane indirect hot water tank, I have just started getting a lot of foaming from the HOT WATER side of my faucets. What would cause this and how do I correct it.

  2. #2
    Join Date
    Aug 2008

    Default Re: Foamy Hot Water from faucet

    This could be caused by the accumulation of sediment or scale at the bottom of the tank, especially if you have well water-----put a bucket under the indirect's flush valve and flush a quart or two from the bottom of the indirect HWH flush valve (you may have to shut off the cold water supply first)---if you get a lot of sediment, or cloudy water, repeat the process until you get clear water---make sure to re-open the cold fresh water supply valve when you're done flushing.
    Last edited by brewster; 01-07-2012 at 01:08 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts