+ Reply to Thread
Results 1 to 3 of 3

Hybrid View

  1. #1
    Join Date
    Oct 2011

    Smile heater return problem

    My house has a unfinished crawlspace and last summer while fixing my blown pipe I saw that the return of the heater has a big hole. The main return is under the house and is made of
    black plastic insulated material. Can I run my heater and just totally cover the main return? Because I can smell the odor under the house of damp soil when the heater runs. I thought of covering the hole, but i haven't check the lenght of the return if its still ok. I'm thinking yo let somebody fix it but it might cost a lot especially its a dirty crawlspace.
    Help me please.

  2. #2
    Join Date
    Aug 2007

    Default Re: heater return problem

    Get the hole patched, that will be the best means of repair. You can probably temp fix it yourself with some aluminum tape until you can get a pro out to fix it properly. You do not want to block off the return to the furnace or you will not get adequate heating or circulation.
    I suffer from CDO ... Its like OCD, but in alphabetical order, LIKE IT SHOULD BE!!!

  3. #3
    Join Date
    Jul 2010

    Default Re: heater return problem

    Also, if you let too much dust and dirt into the heater/a-c, depending on the type of unit you have, you will end up with a bigger cleaning job later.

    While you must do what it takes to remedy the situation, working under the house is extremely difficult: dark, dusty, dirty, spiders and insects, hard to move etc.

    I live in quake area, and whenver I go under the house, I need another person present and a fully charged cell phone...what if?

    Therefore, the labor part won't be cheap.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts