+ Reply to Thread
Results 1 to 3 of 3
  1. #1
    Join Date
    Dec 2011
    Posts
    3

    Default Jado Single Lever Valve Body Disassembly Help

    I have a Jado bathroom faucet lav. Every couple of years the lever collet breaks (cheap pot metal) and the handle
    Freezes to it because of hard water. I cannot remember how I got the clip off to be able to get brass nut off.
    Can't find specs. Can anyone help me. Also are channel locks okay to get the nut off or is there a special tool? Any help would be appreciated.

  2. #2
    Join Date
    Aug 2007
    Posts
    7,929

    Default Re: Jado Single Lever Valve Body Disassembly Help

    If it breaks on you every couple of years, why not replace it with something that you'll never have to touch again? Delta and Pfister are both excellent brands with lots of models to choose from.
    I suffer from CDO ... Its like OCD, but in alphabetical order, LIKE IT SHOULD BE!!!

  3. #3
    Join Date
    Jul 2010
    Location
    SoCal
    Posts
    7,743

    Default Re: Jado Single Lever Valve Body Disassembly Help

    Jado Faucet was an American Standard company and was phased out some time ago. I doubt that you can find parts, and even if you do, the search will make it uneconomical.

    If it were me, I would not even think twice, and replace the faucet.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •