+ Reply to Thread
Results 1 to 1 of 1
  1. #1
    Join Date
    Sep 2011
    Posts
    2

    Question Refinish old tiger oak door

    The huge quarter sawn/tiger oak door on our 1907 bungalow is in need of refinishing. The lower portion of the door has milky residue and the wood grain could be enhanced by a refinish job. I am hesitant to approach this the wrong way because this door is a real treasure. My plan is to sand it lightly to remove any lingering varnish, bring out the grain and simply revarnish with tung oil or spar varnish. Should I restain the wood? If I sand too hard will I damage/remove the grain? I can't tell if it has been stained or simply varnished. Thanks for your expert advice.
    Last edited by Bungalowbeguiled; 09-13-2011 at 07:54 PM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •