Results 1 to 1 of 1
  1. #1
    Join Date
    Mar 2009

    Smile Spatter cleanup and sharp lines when cutting in walls to ceiling

    An easy way to cleanup those paint spatters on area's that you don't want that spatter texture and water based paint is dry, use denatured or rubbing alcohol. Use small amount at a time. Let set for 30 seconds and apply again and it will come off.

    To cut in wall to ceiling use the edge of your putty knife at edge of wall and ceiling. it will leave a small mark and a thin indent to help you keep a straight and clean edge.
    Last edited by Fred Hanks; 03-24-2009 at 12:21 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts