+ Reply to Thread
Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14
  1. #11
    Join Date
    Jun 2007
    Location
    Fayette County, Ohio
    Posts
    6,009

    Default Re: Using a 'twist' doorbell in a modern hollow core door?

    I'm not to sure you will find pop nuts small enough for the holes in the bell. Pop rivets can be painted before you insert them and accomplish about the same results.
    Jack
    Be sure you live your life, because you are a long time dead.-Scottish Proverb

  2. #12
    Join Date
    Feb 2009
    Posts
    9

    Default Re: Using a 'twist' doorbell in a modern hollow core door?

    Haha, here's the reponse I got from the vendor. I'm going to guess they didn't understand the question...

    To install you have to drill a hole through the door for the spindle. Whether the door is hollow or not does not affect the functionality of the bell.
    Thanks,

  3. #13
    Join Date
    Aug 2007
    Location
    Maryland
    Posts
    1,990

    Default Re: Using a 'twist' doorbell in a modern hollow core door?

    I guess we were over thinking it.

  4. #14
    Join Date
    Feb 2009
    Posts
    9

    Default Re: Using a 'twist' doorbell in a modern hollow core door?

    Guess I'll just have to install it and see.

    One thing that I probably am overthinking, heating and cooling loss due to an unsealed hole in the middle of an entry door...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •