+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2010
    Posts
    1

    Default Painting windows with UV film

    I want to paint 6-over-6 double hung windows to which, several years ago, we added UV film (DIY project that involved shampoo, but no adhesive). Can I do this without damaging the film on the glass? My usual method of painting is to paint the frame and muntins as carefully as possible and later use a razor blade to remove any paint on the glass. The alternative of using some kind of masking tape or painter's tape would seem also likely to tear the film. I hope the answer isn't to try some kind of paint shield: for me that is always just a tool to guarantee getting paint where I don't want it and making a bigger mess than if I did nothing at all but paint carefully!

    Any ideas or instructions how to use a paint shield (if I need to)?

    Thanks!

    M in NJ

  2. #2
    Join Date
    Aug 2007
    Location
    Portland, Oregon, formerly of Chicago
    Posts
    1,585

    Default Re: Painting windows with UV film

    M in NJ,

    Professional painters have always just "cut-in" the sash using a good angular brush or "sash tool", as they are called.
    Taping to the film will probably cause it to lift off or tear, even with low tack painters tape.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •