+ Reply to Thread
Results 1 to 3 of 3
  1. #1
    Join Date
    Nov 2010
    Posts
    2

    Default check ball added to well pump

    please advise on best placement of an added checkball to my well pump and simple how to I was told this will overide failing checkball and that adding instead of going after old much simpler thanks for all and any advice as now i starting to loose pressure and am pretty sure is extra cost on electric bill and obviously hard on all of system!
    Last edited by dlang03@hotmail.com; 11-04-2010 at 01:33 PM.

  2. #2
    Join Date
    Jun 2007
    Location
    Fayette County, Ohio
    Posts
    5,775

    Default Re: check ball added to well pump

    A check valve is generally placed just below the pitless adapter but it can be installed anywhere between the well and the bladder tank.

    Jack
    Be sure you live your life, because you are a long time dead.-Scottish Proverb

  3. #3
    Join Date
    Dec 2007
    Location
    Tennessee
    Posts
    1,699

    Default Re: check ball added to well pump

    If the old one is above the pitless adapter, then just replace the old one. If you are not familiar with wells and plumbing, then get a well driller to fix it, in the long run it will be worth the money.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •