Re: Rheem Furnace Problem
Originally Posted by apbj68
Check the fuse at control board. If you have one and sometimes new board does not come with fuse.
They uses blade type automotive fuse. Most of them use 3 amp fuse.
If your unit have fuse or does not require fuse then check the main reason for burnt control panel. Control panel don't burn itself, something must've cause them to burn out.
"Life does not go by the book, we learn as we go along".
You only need two tools in life - WD-40 and Duct Tape.
If it doesn't move and should, use WD-40.
If it shouldn't move and does, use the Duct Tape.