+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2008
    Posts
    19

    Default cost of custom profile repair?

    ANYone know...
    - where we'd find someone that can match exisiting custom profile galvanized steel gutters?
    - roughly what 25 feet of it would cost?
    - and any other common issues we should expect to run into?

    Our church has 40 to 50 y.o. galvanized steel gutters. They are in a custom profile -- in other words, it has the ogee of a standard 'K' at the bottom but a box above that. Two 8-11 ft sections on one side have significant rust and need replacing.

    We are being told by gutter contractors to replace the entire run with standard profile (facia or 'K') aluminum gutters along one or both sides of the entire building at a cost higher than we'd like to lay out at this time.

    I am wondering whether we could find someone to roll the 2 sections we need to replace at a cost less (how much?) than what we've been quoted so far. Thank you!

  2. #2
    Join Date
    Aug 2007
    Posts
    7,152

    Default Re: cost of custom profile repair?

    Look for a company in your area that does architectural sheet metal (usually associated with heating and air conditioning shops ). They will have the ability to make whatever you need, in any amount you need it. If you can find no specific listing in your yellow pages, start calling HVAC shops and ask if they do architectural sheet metal or if they have any leads to such a company.
    I suffer from CDO ... Its like OCD, but in alphabetical order, LIKE IT SHOULD BE!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •