+ Reply to Thread
Results 1 to 2 of 2

Hybrid View

  1. #1
    Join Date
    Jul 2010
    Posts
    2

    Exclamation wood on driveway bridge

    The end of our driveway crosses a small stream to connect with the street. The bridge consists of 3 metal I-beams, firmly attached to the banks, across which are laid oak planks (4" x 10" x 12'). Some of the planks are beginning to chip and crack and I would like to replace them. A local sawmill estimated $4000 to replace the planks.
    I was thinking that if I bolted together some pressure-treated lumber planks to the dimensions of each of the oak planks it would look better and would be a fraction of the price.
    The question is strength. Would my idea support our cars as they cross the bridge?
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Brookfield pic 1.jpg 
Views:	98 
Size:	20.9 KB 
ID:	3696  

  2. #2
    Join Date
    Jun 2007
    Location
    Coventry, RI
    Posts
    340

    Default Re: wood on driveway bridge

    Your best bet would be to check with an engineer as to the strength you need to support the heaviest load that will be crossing that bridge. If you just went ahead and did it without an engineer and probably a permit I doubt your home owners insurance would cover any damages if yours or someone else's vehicle went through.

    Mike

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •