+ Reply to Thread
Results 1 to 3 of 3

Thread: Cyclorama

  1. #1
    Join Date
    Dec 2008
    Posts
    1

    Default Cyclorama

    Hello everyone. Im looking for some ideas on how to create a cycloramic wall.

    For those not familiar with it, a cycloramic wall curves where the wall meets the floor forming a nice smooth radius transition.

    The wall to floor transition I can handle but where I run into problems is that I want to have a compound radius in the corner where two walls meet. SO not only does the back and side walls curve to meet the floor but the curve to meet each other. This aspect itself is also pretty straight forward but where im stumped is where the 2 walls meet each other and the floor since the curve into each other and down to the floor.

    Does this make sense? Any one have any ideas or tips on how to fashion this? Im probably going for about a 2' radius.

  2. #2
    Join Date
    Jun 2007
    Location
    Fayette County, Ohio
    Posts
    5,825

    Default Re: Cyclorama

    Sorry I can't offer any help on this, but do hope you will post some pictures of the process and the finished project.

    I did find this site http://www.astcyc.com/html/wooden.htm perhaps the information on the site will help.
    Jack
    Be sure you live your life, because you are a long time dead.-Scottish Proverb

  3. #3
    Join Date
    Aug 2007
    Posts
    7,157

    Default Re: Cyclorama

    If my theater friend had email, I could ask him for specifics, as he used to build them for a living.
    I suffer from CDO ... Its like OCD, but in alphabetical order, LIKE IT SHOULD BE!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •