6 mil plastic
Type: Posts; User: sweatem
6 mil plastic
I have a picture window with a vinyl frame in the tub/shower area. I had Lowes install the window and he supposedly set the window so the tiles will sit flush with window frame. The walls are down to...
This tub spout is designed for all three. Probably going to use the iron pipe method. Thanks again for the info.
What's is the best way to connect the tub spout? Slip-on, iron pipe, or copper sweat. How do you test faucet for leaks with a slip-on setup? I know the faucet has to be capped off at the shower end...
Oh well, I've tried everything to upload pictures, no luck..
Thanks sir for the info..
I don't think I've ever seen a 5ft tub..
I have a delta faucet with plaster guard. The plaster guard is a 4 inch square plastic guard that clips on the faucet valve. The instructions state that the plaster guard needs to be flush or within...
I also have a sink hole under the carport but I had the main drain replaced near this area.
I think I might have to replace this block glass window. They have new windows now with no grout in between them.
Cool, thanks sir
Okay then , thanks for the reply.
What's the proper way to test a tub/shower faucet for leaks? I have the drywall removed. I was going to cap off both ends and turn the water on and leave it pressurized overnight. Will this work?
I just found out that because I'm new to this site, I have to post 10 times before I can upload pictures. I guess a few mindless posts should do it. ;)
I'm trying to upload some pictures and I keep getting this exclamation point at the end of the upload.
I wanted to know if I can cut out the 2x4 under the block glass window in the shower area and put in new wood without removing the tub or taking the window out. There is also a smaller board that...